• Pouch laminators
  • Small format roll laminators
  • Automatic laminators
  • Large format roll laminators - warm
  • Large format roll laminators - cold
  • APPLICATION TABLES
  • Accessoires
Royal Sovereign RSL-1062 Hot & Cold laminator
The Royal Sovereign RSL-1062 is a roller laminator where you can choose the speed, temperature and roller spacing. This will help you achieve a perfect lamination result for you and your customers. Economical professional laminator for all types of visuals. Laminator on mobile stand. Hot lamination. Lamination width: 1060mm. Film thickness: 25 to 250µ. Speed: up to 2.5 meters/min. Mounting thickness: up to 6mm. Adjustable temperature up to 160°. Number of rollers: 2
0.0 EUR
Royal Sovereign RSC-1403H Cold Laminator with Heat assist
Royal Sovereign RSC-1403H 55" Wide Format Heat Assist Laminator
The RSC-1403H is a high quality, economically priced cold laminator with top roller heat assist capabilities specifically designed for users to easily and professionally finish wide format graphics.
Built for safety and ease of use, this sturdy machine is perfect for laminating and mounting pressure-sensitive graphics up to 55" wide.
•Max Laminate Width: 55"
•Max Film Thickness: 10 mil
•Number of Rollers: 2
•Hot or Cold: Both
0.0 EUR
Royal Sovereign RSC-1654H Cold Laminator with Heat assist
Large format cold laminator 1650mm wide, with thermal assistance up to 50°.
Premium silicone roller.
Mounting thickness up to 15mm.
Adjustable speed up to 5 meters / minute.
Antistatic coating on the work table.
LCD screen.
Cross cutter.
Equipped with a media rewinder.
Ease of maintenance.
Technical characteristics :
Working width 1650mm.
Film thickness 50-500µ.
Maximum laminating speed 5m/min.
Heating time approximately 10 minutes.
Maximum temperature 50°C.
Max thickness for 15mm mounts.
9 level speed adjustment.
Power consumption 1600 watts.
1 year warranty.
Complies with CE safety standards.
0.0 EUR
Royal Sovereign RSC-1700M Cold Laminator with Heat assist
Royal Sovereign RSC-1700M cold laminator allowing mounting up to thicknesses of 25mm and speed up to 15 meters/minute.
Equipped with high quality silicone rollers with a diameter of 150mm.
Maximum lamination width : 152cm.
Electric roller pressure.
Allows lamination with film thicknesses from 20µ to 500µ.
Two-position heated upper roller : 40° or 60°.
Safety laser (no protective cover).
Longitudinal section.
Equipped with 3 knives for vertical cuts in the direction of the media.
Trigger pedal for easy release of the machine from behind it.
Electric power 1600 watts.
Dimensions : L=210cm x D=62cm x H=123cm.
Weight : 190kg.
1 year warranty.
Complies with CE safety standards
0.0 EUR
NEOLT LAYLAM 1650 - 50°C Cold laminator
Main features :
Pneumatic laminator (compressor not included)
Silicone roll for 120c model and rubber for 50c model
Adjustable Pneumatic pressure regulation
Easy pneumatic roll movement (up and down)
Hands Safety sensor
Self-adaptive, the air pressure system with independent pistons adapts automatically to different thicknesses
Adjustable stainless steel rolls friction
Pedal for safety precedure start
Adjustable speed and temperature regulation

Optionals :
Roll holder with clutch
Rewinder roll
Available in the following versions :
Laylam 50°C
Laylam 120°C
The manufacturers reserves the right to change technical and aesthetical specifications without notice.

Datasheet : 1650
Dimensions : 215x45xh140 cm
Max working width : 1650 mm
Max speed : 6 m/min
Max laminating thickness : 30 mm
Depth table included : 450 mm
Height working table : 920 mm
Net weight : 200 kg
Electrical requirements : 230v - 50Hz / 110v - 60Hz
Power consumption : 7,5A - 1800W
0.0 EUR
MF-1700 PREMIUM - 120°C Hot & Cold laminator
Industrial laminator, MF1700-F2 is perfect for most applications of sign and graphic. The Dual-heated rollers with max temperature of 120C offers the possibility not only for laminating but also for mounting and encapsulating up to 1630mm.

Additionally, its fully adjustable tungsten blades can cut most materials with a lifetime that over 15000m.
Smart Entry System
Easy to check speed, temperature, and Lamination statistics.
Pneumatic active cutting
Active cutter by pneumatic.
Fully adjustable trimmer holder.
Plug & play - Strong and integrated frame. Plug & play.
Double heated lamination
Smart Entry System —— Front Panel :
Speed, temp, and lamination statistics, easy to check figures of set temp, real temp, and button speed, as well as find your lamination records in 30 days
Date and time display
Roller up and down

Smart Entry System —— Rear Panel :
Run or stop lamination
Speed statistics, show button speed, which is convenient to adjust machine speed
Active cutter device, easy to use

Pneumatic active cutting roller :
Active cutters by button on rear panel
Fully position adjustable cutters
High flexibility silicon cutting roller

Safety vertical cutter :
Equipped with 3 trimmer holders, 2 Single and 1 Double central blade
Upgraded with two paddles on 2 single trimmer holders
Durable tungsten steel blades, can cut common medias with a lifetime that over 15000m

Premium silicon rollers :
Premium 130mm diameter silicon rollers provide heavy duty work and good finishes
Options for Double heated hot lamination offers the possibility not one for laminating but also for mounting and encapsulating
Max temperature could customize to 150℃

Plug & play :
Plug & play, more friendly for assemble
Strong and integrated frame, easy to use

Pro Series : MF1700-F2
Smart System : ENTRY (Option for PRO)
Front Panel : Speed and temperature
Rear Panel : Speed
Lamination Statistics : Yes
Foot Pedal : Single foot pedal
Max Lam Width : 1630mm/64''
Max Lam Thickness : 28mm/1.1''
Max Speed : 20m/min
Heating : Dual
Max Temp : 120°C
Up and Down : Pneumatic
Roller : Silicon(130mm)
Trimmer Holder : 2 Single and 1 Double Central blades
Power Input : 5200W
N.W. : 260KGS
0.0 EUR
NEOLT LAYLAM 2050 - 50°C Cold laminator
Main features :
Pneumatic laminator (compressor not included)
Silicone roll for 120c model and rubber for 50c model
Adjustable Pneumatic pressure regulation
Easy pneumatic roll movement (up and down)
Hands Safety sensor
Self-adaptive, the air pressure system with independent pistons adapts automatically to different thicknesses
Adjustable stainless steel rolls friction
Pedal for safety precedure start
Adjustable speed and temperature regulation

Optionals :
Roll holder with clutch
Rewinder roll
Available in the following versions :
Laylam 50°C
Laylam 120°C
The manufacturers reserves the right to change technical and aesthetical specifications without notice.

Datasheet : 1650
Dimensions : 215x45xh140 cm
Max working width : 1650 mm
Max speed : 6 m/min
Max laminating thickness : 30 mm
Depth table included : 450 mm
Height working table : 920 mm
Net weight : 200 kg
Electrical requirements : 230v - 50Hz / 110v - 60Hz
Power consumption : 7,5A - 1800W
0.0 EUR
Neolt SHIELD 1650 Cold laminator
Shield is a laminating unit that combines innovation, performance, low investment level, full upgradability and protection of the investiment in the medium/long term.
The Shield series is in fact designed and built to fit the widest range of applications, from car wrapping to interior decoration and corrugated packaging, up to a wide range of display graphics and sign-making applications.
Thanks to its pneumatic technology, the Shield series reduces the setup time of the machine and the need to employ specialized personnel.
Contrary to laminators with electric pressure technology, the possibility of error in the thickness calculation is in fact reduced to zero.
The availability of a version with heated rollers further increases the fields of use.
Main Features
Plug & Play: Shield Series of laminators are equipped with internal air compressor.
It's enough to plug it in, bring the laminator up to temperature and start working;
Eco-sustainable air pressure system with much lower energy consumption compared to electric motors;
Self-adaptive: the air pressure system with independent pistons automatically adjusts to different thicknesses and the manages the flatness defects of the substrate.
The rollers get adapted to the surface in real time;
Flexible: it's possible to pre-set the pressure applied to each substrate.
Once the material is placed is always possible to make adjustments to the pressure;
Options and Accessories
Among the options available are the main rollers heated up to 50°C, the manual horizontal cutting unit and a variable number of vertical cutting units in output, positionable at user's will
0.0 EUR
Neolt SHIELD 2050 Cold laminator
Shield is a laminating unit that combines innovation, performance, low investment level, full upgradability and protection of the investiment in the medium/long term.
The Shield series is in fact designed and built to fit the widest range of applications, from car wrapping to interior decoration and corrugated packaging, up to a wide range of display graphics and sign-making applications.
Thanks to its pneumatic technology, the Shield series reduces the setup time of the machine and the need to employ specialized personnel.
Contrary to laminators with electric pressure technology, the possibility of error in the thickness calculation is in fact reduced to zero.
The availability of a version with heated rollers further increases the fields of use.
Main Features
Plug & Play: Shield Series of laminators are equipped with internal air compressor.
It's enough to plug it in, bring the laminator up to temperature and start working;
Eco-sustainable air pressure system with much lower energy consumption compared to electric motors;
Self-adaptive: the air pressure system with independent pistons automatically adjusts to different thicknesses and the manages the flatness defects of the substrate.
The rollers get adapted to the surface in real time;
Flexible: it's possible to pre-set the pressure applied to each substrate.
Once the material is placed is always possible to make adjustments to the pressure;
Options and Accessories
Among the options available are the main rollers heated up to 50°C, the manual horizontal cutting unit and a variable number of vertical cutting units in output, positionable at user's will
0.0 EUR
NEOLT NEOLAM PLUS 1650/C- 50°C Cold laminator
Main features :
Adjustments from keyboard and display of the thickness of the support to be laminated, up to 40mm
Simple loading and positioning of the material
Oscillating feeding table for easy loading of the material
Separate regulation with separate display of the temperatures of the two rubberized rollers
Regulation from 0 ° C to 120 ° C for model "H"
Foot pedal control for hands-free work
Comprehensive safety system with emergency stop and optical safety protection with self-verification
Viewing and reporting of any anomalies
Electronic adjustment from the keyboard and visualization on the display of the speed of the rollers
Power supply voltage and frequency 400V / 50Hz. or 220V 50-60Hz
Absorbed power 12A 6200W. For 400V / 50Hz
0.0 EUR
FLEXA Easy Lite AIR 1600 Laminator with Heat assist
Wide-format professional heat-assisted top roller laminator for self-adhesive materials (working width 1600 mm).

Suitable for laminating digital printing media for the visual communication, like floor graphics, window graphics, backlit displays, stickers and pre-spaced stickers, pop-up, graphics for trade fairs, shopping centres, retail outlets, car wrapping and many more.

It allows to mount graphics on boards.

Cost-effective laminator with very good quality, price and performance.

Designed and manufactured completely in Italy.

EASY LAMINATION,
GREAT RESULTS
Working flexibility: it mounts images on panels, applies double-sided adhesive films, application tape and protective film
Cost-effective: very good quality, price and performance
Easy to use control panel to set working parameters
Intuitive pressure control of the roller thanks to the pressure regulator and the gauge
Excellent results without air bubbles and defects
Time saving: easy adjustments of the media thanks to the swing-up steel feed table and the automatic locking system of the shafts. Load and unload of rolls of materials in seconds
New cutting unit with titanium coated blades, durable over time, for greater precision and long-term safety (optional)
Easy to use: compact dimensions, light and easy to move
Long-term reliability and safety
Low maintenance costs
Made in Italy: designed and manufactured completely in Italy
SUITABLE
MATERIALS
Floor graphics / Window graphics / Backlit display
Trade shows graphics
Roll-up banners / Pop-up / Stickers
Rigid boards and flexible media
Table top displays
Car wrapping
Pre-spaced stickers
Many more..

Heat-assisted top roller laminator
Control panel
Control panel for adjusting temperature, speed and many more parameters
Pneumatic lifting and lowering of the upper roller
Gauge to display the pressure of the upper roller
Pressure regulator of the upper roller
Cutting unit
Aluminum shafts
Swing-up steel feed table
Front tray
Feed-in guide (optional)
NEW Lowering of the upper roller with pedal on the back side
It works with air compressor (not included)
Feeding control by hand (control panel) or foot pedal (hand free operation)
0.0 EUR
NEOLT NEOLAM PLUS 2050/C- 50°C Cold laminator
Main features :
Adjustments from keyboard and display of the thickness of the support to be laminated, up to 40mm
Simple loading and positioning of the material
Oscillating feeding table for easy loading of the material
Separate regulation with separate display of the temperatures of the two rubberized rollers
Regulation from 0 ° C to 120 ° C for model "H"
Foot pedal control for hands-free work
Comprehensive safety system with emergency stop and optical safety protection with self-verification
Viewing and reporting of any anomalies
Electronic adjustment from the keyboard and visualization on the display of the speed of the rollers
Power supply voltage and frequency 400V / 50Hz. or 220V 50-60Hz
Absorbed power 12A 6200W. For 400V / 50Hz
0.0 EUR