Automatic stapling, easy operation, effortless, time-saving, adjustable stapling depth (only with working table), optional: working table for single or double machines.
Specifications
*Photo and video show ST-50. The appearance of ST-50 and ST-70 are similar. The differences between two models are the stapling capacity, stapling heads inside the machine bodies, and the staple cartridges they use.
Suitable for offices.

Specifications:
Stapling Capacity : 70 sheets (70gsm)
Staple Type : Staple Cartridge for ST-70
Stapling Speed : 120 Staples / min.
Dimensions (W x D x H) : 135x188x135mm
Power supply : 230V/50Hz 115V/60Hz
Weight : 1.53kg
Staple Cartridge for ST-70 : 5000 staples / cartridge, 3 cartridges / box
Optional - Working Table.

The Rapid 106 staper is ideal for booklet stapling or for edge stapling. The 106 replaces the popular Rapid 101 model with many improvments.
There is a simple drop-down table to enable either edge stapling with an adjustable back stop that triggers the staples or with the table down for saddle/booklet stapling using a foot-switch to activate the staples. There are pull-out arms for accurate registration and a wheel to adjust the power.
Warranty 1 year.

The Rapid 5050 electrical stitcher can staple 5000 times before reloading.
From 2 to 50 sheets Rapid 5050 without changing between staple sizes, just because the pins are folded parallel.
The 5000 staples cassette also contains the parts that wear out. By putting a new one, you have also a new stapling machine.
The stapling is very smooth and quiet, even for thick paper sets.
It starts automatically when the paper reaches an depth adjustable switch.
The stapling power is adjusted automatically.
Warranty 1 year.

Traduction pas disponible.

The Rapid 5080 electrical stitcher can staple 5000 times before reloading.
From 2 to 80 sheets Rapid 5080 without changing between staple sizes, just because the pins are folded parallel.
The 5000 staples cassette also contains the parts that wear out.
By putting a new one, you have also a new stapling machine.
The stapling is very smooth and quiet, even for thick paper sets.
It starts automatically when the paper reaches an depth adjustable switch.
The stapling power is adjusted automatically.
Warranty 1 year.

The H 18T, a robust flat stapler for all daily tasks.
Special support table with freely adjustable stops for precise stapling positions.
Up to 180 sheets (80g plain paper) stapling capacity and perfect stapling results via the use of professional staples.
Number of stapling heads : 1.
Flat stapling : 2-180 sheets (18 mm, 80g paper).
Throat depth : 150mm.
Saddle stapling : no
Table size : up to DIN A3.
Staples (sizes) : 69/8-22, 70/6-22.
Loads of magazine : 150 pcs.
Versions Table.
Machine dimensions : 530x450x350mm.
Weight : 13kg.
Warranty 1 year.

Professional electric stapling machine for saddle stapling and flat stapling.
Flat 24/6 or loop Ri24/6 staples mechanism in standard.
1 stapling head, head can be retrofitted (up to 4-heads possible).
Extremely durable stapling heads for pro users.
Stapler capacity: 300 pcs (type 24 staples) or 400pcs (type 26 staples)
Standard maximum stapling thickness flat/loop up to 50 sheets 80gsm (approx. 5mm).
Optional head for higher thickness 100 sheets flat only (approx. 10mm)
Flat closing of staples.
Distance of stapling heads Adjustable in range 48mm - 245mm .
Stapling thickness max 50mm (100mm with optional mechanism "9" - only 1 or 2 heads max)
Material feeding and cycle Manual feeding of material.
Electic stapling by pressing foot pedal.
Speed : 93 cycles/minute.
Staple head capacity : 300pcs type 24 or 400 pcs type 26.
Saddle stapling size : 298mm A3 (open size A2).
Motor : 0,18 kW.
Weight : 30kg.
Dimensions : W=540mm×L=535mm×H=930mm.
Noise level : < 70 dB(A).
Power supply :230V/50Hz.
Warranty 1 year

With the Rinak electric stapler, booklet and edge stapling is fast and easy.
The Rinak is ideal for offices, schools, copy shops and printhouses with mainly small-volume jobs.
The table can be tilted to change from flat to saddle stapling.
The variable paper stop ensures an accurate staple spacing, which is particularly important when loop staples are used.
Staples can be reloaded easily, just by opening the magazine towards the front.
Warranty 1 year.

The little all-rounder among STAGO staplers is ideal for professional use in offices, law firms, schools, government agencies and copy shops.
The Stago HM-6 is characterised by its ease of use.
The conversion of the stop table between the flat stapler and saddle stapler takes a few steps and is quickly and easily possible even for inexperienced users.
Freely adjustable stops ensure an accurate, repeatable stapling position.
For a perfect stapling result without annoying marks, the stapling force can be finely adjusted via a dial.
For longer runs, the HM 6/2 model with twin stapling heads and a fixed staple clearance of 80mm is suitable (binder dimension). Perfect for booklet making with loop staples in one working step.
Customised solutions can also be implemented inexpensively on the basis of the HM-6.

Professional electric stapling machine for saddle stapling and flat stapling.
Flat 24/6 or loop Ri24/6 staples mechanism in standard.
2 stapling heads, heads can be retrofitted (up to 4-heads possible).
Extremely durable stapling heads for pro users.
Stapler capacity: 300 pcs (type 24 staples) or 400pcs (type 26 staples)
Standard maximum stapling thickness flat/loop up to 50 sheets 80gsm (approx. 5mm).
Optional head for higher thickness 100 sheets flat only (approx. 10mm)
Flat closing of staples.
Distance of stapling heads Adjustable in range 48mm - 245mm .
Stapling thickness max 50mm (100mm with optional mechanism "9" - only 1 or 2 heads max)
Material feeding and cycle Manual feeding of material.
Electic stapling by pressing foot pedal.
Speed : 93 cycles/minute.
Staple head capacity : 300pcs type 24 or 400 pcs type 26.
Saddle stapling size : 298mm A3 (open size A2).
Motor : 0,18 kW.
Weight : 30kg.
Dimensions : W=540mm×L=535mm×H=930mm.
Noise level : < 70 dB(A).
Power supply :230V/50Hz.
Warranty 1 year

Made to last. Robust manual stapling machine for short runs and special requirements.
An extreme throat depth is no problem for the HM 18BSS model.
With a throat depth of up to 300mm with a stapling capacity of up to 18mm (80g), unusual requirements are not a challenge.
The manual free-standing stapler masters flat and saddle stapling. The modification of the support table is possible with just a few simple hand movements.
The operation is ergonomically designed with a foot pedal.
Number of stapling heads : 1.
Flat stapling : 2-180 sheets (18 mm, 80g paper).
Throat depth : 300mm.
Saddle stapling : yes.
Table size : up to DIN A3.
Staples (sizes) : 69/8-22, 70/6-22.
Loads of magazine : 150 pcs.
Machine dimensions : 1100 / 650 / 850mm.
Weight : 70kg.
Warranty 1 year.

The proven electric stapler Rinak has been developed further and is now also available as Rinak Duo. By connection two Rinak staplers, booklets and pads can now be produced with two staples in one pass.

Even single Rinak staplers which are already installed at customer places can be upgrated to a Rinak Duo.

The staples are positioned precisely and the accurate spacing of the staples à which is especially important with loop staples à is ensured.

All excellent features of the Rinak have been retained unchanged:

Producing booklets up to 30 sheets and pads up to 40 sheets by using staple sizes 26/6, Ri26/6 and 26/8S.
Use of loop staples as a standard feature without any extra adjustments.
A switch allows to choose between thin and thick paper stock.
Operated by a foot switch

The little all-rounder among STAGO staplers is ideal for professional use in offices, law firms, schools, government agencies and copy shops.
The Stago HM-6 is characterised by its ease of use.
The conversion of the stop table between the flat stapler and saddle stapler takes a few steps and is quickly and easily possible even for inexperienced users.
Freely adjustable stops ensure an accurate, repeatable stapling position.
For a perfect stapling result without annoying marks, the stapling force can be finely adjusted via a dial.
For longer runs, the HM 6/2 model with twin stapling heads and a fixed staple clearance of 80 mm is suitable (binder dimension). Perfect for booklet making with loop staples in one working step.
Customised solutions can also be implemented inexpensively on the basis of the HM-6.

WS-601 electric wire stitching machine equipped with a hohner stapling head.
The WS-601 allows flat or saddle stapling with flat back staple quality.
Stapling capacity up to 60 sheets 80gsm.
Staples width 12mm.
Uses #26 (0,5mm) or #28 (0,4mm) wire spools.
Staple length adjustement.
Stitching speed : 75 cycles per minute.
Electric connection 220volts-50Hz - Power 100 watts.
Dimensions : H=770mm x W=500mm x D=350mm.
Weight 19kg.
Warranty 1 year.

With its powerful electric motor and the integrated foot release, the Tak 18 electric pad stapler is perfect for stapling thick pads of up to 14 mm.

The pad stapler is made of a non-distorting cast iron body and equipped with a robust stapling head. All wear parts can be easily replaced. The back stop is infinitely variable.

The COLUMBIA uses the whole range of standard staples series 50 and 24, including button-hole, and will staple thicknesses ranging from one sheet up to a maximum of 17mm.
the stapling head is standard throughout the range and the base varies for different applications.
Dimensions : W=58cm x D=37cm x H=29cm.
Weight : 27kg.
Warranty 1 year.

The Stago HM-15 and HM-15/2 are the staple professionals among the STAGO staplers.
They combine versatility, efficiency, and robustness.
Designed for professional continuous use.
With a stapling capacity of up to 17 mm with one or twin stapling heads, they are the reference for the bench models.
Using a few simple hand movements, the support table can be converted between a flat and saddle stapler.
Staple front loading and a large staple cartridge allows for efficient operation even for small runs.
With the fully automatic stapling force adjustment and the active clenchers, perfect stapling results are a breeze.
The ability to process additional staple loops complete our range of bestsellers.
For longer runs, the HM 15/2 model with twin stapling heads and a fixed staple clearance of 80 mm (folder dimension) is suitable. Perfect for booklet making with loop staples in one working step.

WS-602 electric stitching machine equipped with two robust stapling heads from the famous German manufacturer Hohner.
The WS-602 allows flat or saddle stapling.
Ajustable stapling heads spacing from 55 to 125mm.
The WS-602 stapler has a stapling capacity of up to 60 sheets of 80gsm.
Width of staples : 12mm.
Uses spools of n°26 (0,5mm) or n°28 (0,4mm) wire.
Perfectly flat spine stapling quality.
Staple length adjustment.
Speed : 75 cycles/minute.
Electric connection 220v-50Hz - Power 200 watts.
Dimensions : H=820mm x W=600mm x D=470mm.
Weight : 58kg.
Warranty 1 year.

Nagel MULTINAK FS Manual stapler with 2 heads

The Multinak twin-headed staplers allow the efficient production of jobs requiring frequent change-over between flat and saddle stapling. Versatile and durable, the machines are the industry standard for all types of commercial and inplant applications.
The Mutlinak FS is a treadle version and operation is done smoothly by pressing the pedal.
Warranty 1 year.

Agrafeuse automatique USM 140 idéale pour tout vos travaux professionnels.
D'une très grande capacité de 250 feuilles, elle vous permettra d'agrafer vos documents les plus épais.
Vous pourrez régler la distance entre les têtes de 40 a 140mm, et ainsi adapter l'agrafage à tout type de documents, en vous garantissant un résultat d'agrafage parfait.
Le déclenchement de l'agrafage ce fait via une pédale au pied.
Nombre de têtes d'agrafage : 2 .
Distance ajustable entre les têtes : 40-140mm.
Agrafage à plat : 2-250 feuilles 80gr/m².
Agrafage à cheval : oui.
Hauteur de travail : 880mm.