Royal Sovereign RSC-1403H 55" Wide Format Heat Assist Laminator
The RSC-1403H is a high quality, economically priced cold laminator with top roller heat assist capabilities specifically designed for users to easily and professionally finish wide format graphics.
Built for safety and ease of use, this sturdy machine is perfect for laminating and mounting pressure-sensitive graphics up to 55" wide.
•Max Laminate Width: 55"
•Max Film Thickness: 10 mil
•Number of Rollers: 2
•Hot or Cold: Both

Large format cold laminator 1650mm wide, with thermal assistance up to 50°.
Premium silicone roller.
Mounting thickness up to 15mm.
Adjustable speed up to 5 meters / minute.
Antistatic coating on the work table.
LCD screen.
Cross cutter.
Equipped with a media rewinder.
Ease of maintenance.
Technical characteristics :
Working width 1650mm.
Film thickness 50-500µ.
Maximum laminating speed 5m/min.
Heating time approximately 10 minutes.
Maximum temperature 50°C.
Max thickness for 15mm mounts.
9 level speed adjustment.
Power consumption 1600 watts.
1 year warranty.
Complies with CE safety standards.

Royal Sovereign RSC-1700M cold laminator allowing mounting up to thicknesses of 25mm and speed up to 15 meters/minute.
Equipped with high quality silicone rollers with a diameter of 150mm.
Maximum lamination width : 152cm.
Electric roller pressure.
Allows lamination with film thicknesses from 20µ to 500µ.
Two-position heated upper roller : 40° or 60°.
Safety laser (no protective cover).
Longitudinal section.
Equipped with 3 knives for vertical cuts in the direction of the media.
Trigger pedal for easy release of the machine from behind it.
Electric power 1600 watts.
Dimensions : L=210cm x D=62cm x H=123cm.
Weight : 190kg.
1 year warranty.
Complies with CE safety standards

Lami Revo is "Economical Full Automatic Laminator" Lami Revo can do laminating from feeding papers to cutting automatically.
Compared to regular automatic-laminator,film setting of Lami Revo is extremely easy !
Possible easy inside clean by dopting "Cover open fuction".
Specification :
Max. laminating width : 305mm
Max. speed : 1.0m/min (Fixed)
Power requirements : AC230V
Power consumption : 1150 Watt
Width : 680mm.
Depth : 506mm.
Height : 337mm.
Weight : 30kg.
Warranty 1 year.

Main features :
Pneumatic laminator (compressor not included)
Silicone roll for 120c model and rubber for 50c model
Adjustable Pneumatic pressure regulation
Easy pneumatic roll movement (up and down)
Hands Safety sensor
Self-adaptive, the air pressure system with independent pistons adapts automatically to different thicknesses
Adjustable stainless steel rolls friction
Pedal for safety precedure start
Adjustable speed and temperature regulation

Optionals :
Roll holder with clutch
Rewinder roll
Available in the following versions :
Laylam 50°C
Laylam 120°C
The manufacturers reserves the right to change technical and aesthetical specifications without notice.

Datasheet : 1650
Dimensions : 215x45xh140 cm
Max working width : 1650 mm
Max speed : 6 m/min
Max laminating thickness : 30 mm
Depth table included : 450 mm
Height working table : 920 mm
Net weight : 200 kg
Electrical requirements : 230v - 50Hz / 110v - 60Hz
Power consumption : 7,5A - 1800W

SKYLAM 1650 Hot & Cold Digital Roll Laminator.
Safety Guard - Rollers shall be stopped automatically if will be opened.
Special Core - 3 sizes(25, 58 and 76mm) in one unit.
Auto Power Off.
2 LCD Displays.
Emergency Stop.
Side Cutters.
Air Cooling Fans.
Foot Switch.
Maximum Laminating Width : 1630mm.
Maximum Film Thickness : 250 micron.
Heat-Up Time : 8 - 10 Minutes.
Laminating Temperature Range : 0 - 140ºC.
Max Speed : 3 Minutes Per Minute.
Warranty : 1 Year.

Industrial laminator, MF1700-F2 is perfect for most applications of sign and graphic. The Dual-heated rollers with max temperature of 120C offers the possibility not only for laminating but also for mounting and encapsulating up to 1630mm.

Additionally, its fully adjustable tungsten blades can cut most materials with a lifetime that over 15000m.
Smart Entry System
Easy to check speed, temperature, and Lamination statistics.
Pneumatic active cutting
Active cutter by pneumatic.
Fully adjustable trimmer holder.
Plug & play - Strong and integrated frame. Plug & play.
Double heated lamination
Smart Entry System —— Front Panel :
Speed, temp, and lamination statistics, easy to check figures of set temp, real temp, and button speed, as well as find your lamination records in 30 days
Date and time display
Roller up and down

Smart Entry System —— Rear Panel :
Run or stop lamination
Speed statistics, show button speed, which is convenient to adjust machine speed
Active cutter device, easy to use

Pneumatic active cutting roller :
Active cutters by button on rear panel
Fully position adjustable cutters
High flexibility silicon cutting roller

Safety vertical cutter :
Equipped with 3 trimmer holders, 2 Single and 1 Double central blade
Upgraded with two paddles on 2 single trimmer holders
Durable tungsten steel blades, can cut common medias with a lifetime that over 15000m

Premium silicon rollers :
Premium 130mm diameter silicon rollers provide heavy duty work and good finishes
Options for Double heated hot lamination offers the possibility not one for laminating but also for mounting and encapsulating
Max temperature could customize to 150℃

Plug & play :
Plug & play, more friendly for assemble
Strong and integrated frame, easy to use

Pro Series : MF1700-F2
Smart System : ENTRY (Option for PRO)
Front Panel : Speed and temperature
Rear Panel : Speed
Lamination Statistics : Yes
Foot Pedal : Single foot pedal
Max Lam Width : 1630mm/64''
Max Lam Thickness : 28mm/1.1''
Max Speed : 20m/min
Heating : Dual
Max Temp : 120°C
Up and Down : Pneumatic
Roller : Silicon(130mm)
Trimmer Holder : 2 Single and 1 Double Central blades
Power Input : 5200W
N.W. : 260KGS

Main features :
Pneumatic laminator (compressor not included)
Silicone roll for 120c model and rubber for 50c model
Adjustable Pneumatic pressure regulation
Easy pneumatic roll movement (up and down)
Hands Safety sensor
Self-adaptive, the air pressure system with independent pistons adapts automatically to different thicknesses
Adjustable stainless steel rolls friction
Pedal for safety precedure start
Adjustable speed and temperature regulation

Optionals :
Roll holder with clutch
Rewinder roll
Available in the following versions :
Laylam 50°C
Laylam 120°C
The manufacturers reserves the right to change technical and aesthetical specifications without notice.

Datasheet : 1650
Dimensions : 215x45xh140 cm
Max working width : 1650 mm
Max speed : 6 m/min
Max laminating thickness : 30 mm
Depth table included : 450 mm
Height working table : 920 mm
Net weight : 200 kg
Electrical requirements : 230v - 50Hz / 110v - 60Hz
Power consumption : 7,5A - 1800W

Main features :
Pneumatic laminator (compressor not included)
Silicone roll for 120c model and rubber for 50c model
Adjustable Pneumatic pressure regulation
Easy pneumatic roll movement (up and down)
Hands Safety sensor
Self-adaptive, the air pressure system with independent pistons adapts automatically to different thicknesses
Adjustable stainless steel rolls friction
Pedal for safety precedure start
Adjustable speed and temperature regulation

Optionals :
Roll holder with clutch
Rewinder roll
Available in the following versions :
Laylam 50°C
Laylam 120°C
The manufacturers reserves the right to change technical and aesthetical specifications without notice.

Datasheet : 1650
Dimensions : 215x45xh140 cm
Max working width : 1650 mm
Max speed : 6 m/min
Max laminating thickness : 30 mm
Depth table included : 450 mm
Height working table : 920 mm
Net weight : 200 kg
Electrical requirements : 230v - 50Hz / 110v - 60Hz
Power consumption : 7,5A - 1800W

Shield is a laminating unit that combines innovation, performance, low investment level, full upgradability and protection of the investiment in the medium/long term.
The Shield series is in fact designed and built to fit the widest range of applications, from car wrapping to interior decoration and corrugated packaging, up to a wide range of display graphics and sign-making applications.
Thanks to its pneumatic technology, the Shield series reduces the setup time of the machine and the need to employ specialized personnel.
Contrary to laminators with electric pressure technology, the possibility of error in the thickness calculation is in fact reduced to zero.
The availability of a version with heated rollers further increases the fields of use.
Main Features
Plug & Play: Shield Series of laminators are equipped with internal air compressor.
It's enough to plug it in, bring the laminator up to temperature and start working;
Eco-sustainable air pressure system with much lower energy consumption compared to electric motors;
Self-adaptive: the air pressure system with independent pistons automatically adjusts to different thicknesses and the manages the flatness defects of the substrate.
The rollers get adapted to the surface in real time;
Flexible: it's possible to pre-set the pressure applied to each substrate.
Once the material is placed is always possible to make adjustments to the pressure;
Options and Accessories
Among the options available are the main rollers heated up to 50°C, the manual horizontal cutting unit and a variable number of vertical cutting units in output, positionable at user's will

Main features :
Pneumatic laminator (compressor not included)
Silicone roll for 120c model and rubber for 50c model
Adjustable Pneumatic pressure regulation
Easy pneumatic roll movement (up and down)
Hands Safety sensor
Self-adaptive, the air pressure system with independent pistons adapts automatically to different thicknesses
Adjustable stainless steel rolls friction
Pedal for safety precedure start
Adjustable speed and temperature regulation

Optionals :
Roll holder with clutch
Rewinder roll
Available in the following versions :
Laylam 50°C
Laylam 120°C
The manufacturers reserves the right to change technical and aesthetical specifications without notice.

Datasheet : 2050
Dimensions : 255x45xh140 cm
Max working width : 2050 mm
Max speed : 6 m/min
Max laminating thickness : 30 mm
Depth table included : 450 mm
Height working table : 920 mm
Electrical requirements : 230v - 50Hz / 110v - 60Hz
Power consumption : 7,5A - 1800W

The RSH-1652 with a maximum lamination width of 65 inches is high-end dual hot/cold laminators.
Capable of both thermal and pressure lamination, encapsulation as well as mounting of printed output.
Heavy duty
9 settings for temperature and speed control.
Take up device for release liner.
25mm mounting available.
Max laminating width 1650mm / 65"
Max Temperature 160°.
Film thickness 25-250mic / 1-10mil.
Max laminating speed 4m/min.
Ready time 30 min.
Heating Method Hot Roller.
Drive motor DC Geared Motor.
Speed control 9 settings.
Transport type 4 Roller.
Warranty 1 year.

The compact CL 2019 is robustly manufactured in Europe.
Carbon fiber design.
Brushed stainless steel parts.
Protected linear guide.
Hydraulic shock absorbers at the end of the table.
Worktable perfectly flat when the rolling roller is lowered.
The solution uses an integrated mechanism that ensures incredible reliability and stability at the table.
The legs of the table are foldable to ensure a convenient and easy assembly.
The table can thus be moved very easily from one place to another.
Optional shelves can be easily added with pre-drilled mounting points.
Each machine pulley contains two precision bearings embedded in a protective casing.
This results in incredible durability, extreme accuracy and a much longer machine life.
An engine can be added at any time by the user and in just a few minutes.
This increases the working speed and ease of use.
A set of LED backlight can be added at any time by the user and in just minutes.
No tools are needed.
An incredible power of 280 watts LED adds another dimension to your work and eliminates the stress of the alignment process!
Technical characteristics :
Dimensions of the table: L= 296cm x W= 165cm x H= 105cm.
Working dimensions: W= 255cm x W= 138cm x H= 90cm.
Weight: 204kg.
Total warranty 1 year & 5 years on parts (the glass worktable is excluded from the warranty).
Complies with CE safety standards.

Shield is a laminating unit that combines innovation, performance, low investment level, full upgradability and protection of the investiment in the medium/long term.
The Shield series is in fact designed and built to fit the widest range of applications, from car wrapping to interior decoration and corrugated packaging, up to a wide range of display graphics and sign-making applications.
Thanks to its pneumatic technology, the Shield series reduces the setup time of the machine and the need to employ specialized personnel.
Contrary to laminators with electric pressure technology, the possibility of error in the thickness calculation is in fact reduced to zero.
The availability of a version with heated rollers further increases the fields of use.
Main Features
Plug & Play: Shield Series of laminators are equipped with internal air compressor.
It's enough to plug it in, bring the laminator up to temperature and start working;
Eco-sustainable air pressure system with much lower energy consumption compared to electric motors;
Self-adaptive: the air pressure system with independent pistons automatically adjusts to different thicknesses and the manages the flatness defects of the substrate.
The rollers get adapted to the surface in real time;
Flexible: it's possible to pre-set the pressure applied to each substrate.
Once the material is placed is always possible to make adjustments to the pressure;
Options and Accessories
Among the options available are the main rollers heated up to 50°C, the manual horizontal cutting unit and a variable number of vertical cutting units in output, positionable at user's will

Main features :
Adjustments from keyboard and display of the thickness of the support to be laminated, up to 40mm
Simple loading and positioning of the material
Oscillating feeding table for easy loading of the material
Separate regulation with separate display of the temperatures of the two rubberized rollers
Regulation from 0 ° C to 120 ° C for model "H"
Foot pedal control for hands-free work
Comprehensive safety system with emergency stop and optical safety protection with self-verification
Viewing and reporting of any anomalies
Electronic adjustment from the keyboard and visualization on the display of the speed of the rollers
Power supply voltage and frequency 400V / 50Hz. or 220V 50-60Hz
Absorbed power 12A 6200W. For 400V / 50Hz

Full-Auto operated laminator Lami Revo-14T.
Auto feeding, Auto sheet cut, auto counting setting, custom border size.
Overwhelming productivity
High productivity, save time and labor cost, save power comsumption, no rejection due to human error.
Japanese quality assurance.
5 minutes fast warm up time.
Easy " inside cleaning" design.
Can load upto 300pcs papers.
Support max substrate upto 160grams thickness.
Both metal & heater rollers in used to ensure the best laminating quality.
Variety choice of sizes, films and finishing.
Made in Korea quality films.
Support A4 till A3 with Unlimitted length.
Available in 50µ, 80µ, 100µ & 125µ films.
Available in glossy, matt et Soft Touch Matt finishing.
Optional B4 & B5 shaft is available.
Max. laminating width : 305mm
Max. substrate thickness : 160gr./m².
Max. speed : 1.6m/min. (Fixed)
Processing temperature Room : temp.~120°;
Power requirements : 230V.
Power consumption : 1150 Watt.

Wide-format professional heat-assisted top roller laminator for self-adhesive materials (working width 1600 mm).

Suitable for laminating digital printing media for the visual communication, like floor graphics, window graphics, backlit displays, stickers and pre-spaced stickers, pop-up, graphics for trade fairs, shopping centres, retail outlets, car wrapping and many more.

It allows to mount graphics on boards.

Cost-effective laminator with very good quality, price and performance.

Designed and manufactured completely in Italy.

EASY LAMINATION,
GREAT RESULTS
Working flexibility: it mounts images on panels, applies double-sided adhesive films, application tape and protective film
Cost-effective: very good quality, price and performance
Easy to use control panel to set working parameters
Intuitive pressure control of the roller thanks to the pressure regulator and the gauge
Excellent results without air bubbles and defects
Time saving: easy adjustments of the media thanks to the swing-up steel feed table and the automatic locking system of the shafts. Load and unload of rolls of materials in seconds
New cutting unit with titanium coated blades, durable over time, for greater precision and long-term safety (optional)
Easy to use: compact dimensions, light and easy to move
Long-term reliability and safety
Low maintenance costs
Made in Italy: designed and manufactured completely in Italy
SUITABLE
MATERIALS
Floor graphics / Window graphics / Backlit display
Trade shows graphics
Roll-up banners / Pop-up / Stickers
Rigid boards and flexible media
Table top displays
Car wrapping
Pre-spaced stickers
Many more..

Heat-assisted top roller laminator
Control panel
Control panel for adjusting temperature, speed and many more parameters
Pneumatic lifting and lowering of the upper roller
Gauge to display the pressure of the upper roller
Pressure regulator of the upper roller
Cutting unit
Aluminum shafts
Swing-up steel feed table
Front tray
Feed-in guide (optional)
NEW Lowering of the upper roller with pedal on the back side
It works with air compressor (not included)
Feeding control by hand (control panel) or foot pedal (hand free operation)

The Lamidesk SuperSpeed ​​CNC is an easy-to-use application table.
The SuperSpeed ​​CNC is available in several versions: manual or optional motorized version.
Several table sizes are available (cm): 300x160, 300x210, 400x160, 400x210, 500x160, 500x210, 600x160.
Several options available: Led lighting, heating roller, cutting mat.
On the motorized version, the user can mount large prints on their own.
Thanks to its very robust structure and quality components, the Lamidesk can work continuously, absorbing large volumes.
Easy to use, the Lamidesk has no bridge above the roller which makes mounting prints very easy.
The optional roll holder makes it easy to work with a roll of laminate or tape application.
You don't have to mount the roller on the bar but just put it on top!
Optional LED lighting can be integrated into the table. This lighting facilitates positioning.
Thanks to the CNC control, you can determine a position yourself according to your wishes.
CNC control allows you to work faster and more efficiently!
The Lamidesk SuperSpeed ​​CNC has a standard mounting height of up to 100mm. Optionally, you have the option of mounting up to a height of 300mm.
SuperSpeed ​​CNCs are supplied without a compressor, optional on our compressor page. The BB-15V model is perfectly suited.
Robust European manufacture, the warranty is 1 year.
Complies with CE safety standards.

Main features :
Adjustments from keyboard and display of the thickness of the support to be laminated, up to 40mm
Simple loading and positioning of the material
Oscillating feeding table for easy loading of the material
Separate regulation with separate display of the temperatures of the two rubberized rollers
Regulation from 0 ° C to 120 ° C for model "H"
Foot pedal control for hands-free work
Comprehensive safety system with emergency stop and optical safety protection with self-verification
Viewing and reporting of any anomalies
Electronic adjustment from the keyboard and visualization on the display of the speed of the rollers
Power supply voltage and frequency 400V / 50Hz. or 220V 50-60Hz
Absorbed power 12A 6200W. For 400V / 50Hz

Fully Automatic Laminator with 4 Side Trim Function
With Revo-Flex, you can easily select With/No Margin, also the various functions can
make documents more expressive and suitable for any situation.
Feeding, Laminating, Cutting & Trimming are fully automated.
Press the start button and walk away.
4 Side Trim Function
Long-awaited new feature of Revo Series.
Side slitters are equipped, it can be With-Margin or No-Margin lamination.
LCD touch panel makes any setting intuitive and easy.
Possible to easily clean the inside by using the "Cover-Open Function".
Max. laminating width 320mm
Max.Substrate thickness 38/80/100/150μ(exclusive film)*¹
Max. speed 700～2,000mm/min (variable type)
Laminating temperature OFF、80～140℃
Power requirement / consumption 【UL】AC100V 50/60Hz 1000W
External dimensions[W×D×H](mm) 1,300 × 610 × 1,080
(With stand, feeder tray, extension tray, stacker)
Weight 70kg
Feeder tray capacity 200 Sheets (copy paper)
Available paper thickness 64 - 240g/m2
Warm-up time 5minutes(approx.)*²
Size of paper used A3/A4/A5/B4/B5/Letter/Digital
Finished size*³ With-Margin
　A3：303×426mm
　A4：303×216mm
　B4：263×370mm
　B5：263×188mm
　A5：216×154mm
No-Margin
　A3：294×417mm
　A4：294×207mm
　B4：254×361mm
　B5：254×179mm
　A5：207×145mm
*1 Only authorized Revo Film can be used.
*2 When set to 100℃(212℉) . Depends on the environment.
*3 Error range: ±0.5mm (W,H)